Specifications
Product SKUs |
|
SYS-6028U-TRTP+ | SuperServer 6028U-TRTP+ (Black) |
Motherboard |
|
Super X10DRU-i+ | |
Processor/Cache |
|
CPU | Intel® Xeon® processor E5-2600 v3 family (up to 160W TDP) * Dual Socket R3 (LGA 2011) |
Cores / Cache | Up to 18 Cores / Up to 45MB Cache |
System Bus | QPI up to 9.6 GT/s |
Note | * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization. |
System Memory |
|
Memory Capacity | 24x 288-pin DDR4 DIMM slots Up to 1.5TB ECC LRDIMM, RDIMM |
Memory Type | 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit |
DIMM Sizes | 64GB, 32GB, 16GB, 8GB, 4GB |
Memory Voltage | 1.2 V |
Error Detection | Corrects single-bit errors |
On-Board Devices |
|
Chipset | Intel® C612 chipset |
SATA | SATA3 (6Gbps) with RAID 0, 1, 5, 10 |
IPMI | Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support ASPEED AST2400 BMC |
Network Connectivity | 2x RJ45 10GBase-T LAN ports 1x Realtek RTL8211E PHY (dedicated IPMI) |
Graphics | ASPEED AST2400 BMC |
Input / Output |
|
SATA | 10x SATA3 (6Gbps) ports |
SAS | 12x SAS3 ports support via optional Add-on Card |
LAN | 2x RJ45 10GBase-T LAN ports 1x RJ45 Dedicated IPMI LAN port |
USB | 5x USB 3.0 ports (2 rear, 2 front, 1 Type A) |
Video | 1x VGA Connector |
DOM | 2x SuperDOM (Disk on Module) ports |
Serial Port | 1x Serial header |
System BIOS |
|
BIOS Type | 128Mb SPI Flash EEPROM with AMI BIOS |
BIOS Features | Plug and Play (PnP) APM 1.2 PCI 2.3 ACPI 1.0 / 2.0 / 3.0 / 4.0 USB Keyboard support SMBIOS 2.7.1 UEFI 2.3.1 |
Management |
|
Software | SuperDoctor® 5 Intel® Node Manager 3.0 Watch Dog NMI SMCBU and SMM Optional IPMI 1.5 / 2.0 |
Power Configurations | ACPI Power Management Power-on mode for AC power recovery |
Chassis |
|
Form Factor | 2U Rackmount |
Model | CSE-829UAC-R1K02 |
Dimensions and Weight |
|
Height | 3.5″ (89mm) |
Width | 17.2″ (437mm) |
Depth | 28.46″ (723mm) |
Weight | Net Weight: 36 lbs (16.4 kg) Gross Weight: 72 lbs (32.7 kg) |
Available Color | Black |
Front Panel |
|
Buttons | Power On/Off button System UID button |
LEDs | Power LED Hard drive activity LED 2x Network activity LEDs UID LED |
Expansion Slots |
|
PCI-Express | 1x PCI-E 3.0 x16 slot (FH, 10.5″ L) 7x PCI-E 3.0 x8 slots (5x FH, 10.5″ L, 1x LP, 1x Internal LP) (Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.) |
Drive Bays |
|
Hot-swap | 12x Hot-swap 3.5″ Drive Bays: 10x SATA3 ports by default Optional drive support: 12x SAS3 Note: optional storage card is required to support more than 10 drives. |
System Cooling |
|
Fans | 4x 8cm heavy duty PWM fans |
Backplane | |
2U SAS/SATA backplane | |
Power Supply with Digital Switching Control |
|
1000W Redundant Titanium Level (96%) Single Output Power Supplies | |
AC Input | 100-127 V, 50-60 Hz 200-240 V, 50-60 Hz |
+12V | Max: 62.5A & Min: 0A (100Vac-127Vac)
Max: 83A (200Vac-240Vac) & Min: 0A |
12V SB | Max: 2.1A Min: 0A |
Certification | Titanium Level |
PC Health Monitoring |
|
Voltage | Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages. 5+1 Phase-switching voltage regulator |
FAN | 8x 4-pin fan headers Status monitor for speed control Pulse Width Modulated (PWM) fan connectors |
Temperature | Support to monitor Supermicro AOC temperatures from IPMI or SD 5 Monitoring for CPU and chassis environment CPU thermal trip support Thermal Control for 8x Fan Connectors Thermal Monitor 2 (TM2) support PECI |
LED | Memory DIMM ECC error LEDs CPU / System Overheat LED Suspend static indicator LED UID/Remote UID |
Standard Parts List |
|||
Part Number | Qty | Description | |
Motherboard / Chassis | MBD-X10DRU-i+ | 1 | Super X10DRU-i+ Motherboard |
CSE-829UAC-R1K02 | 1 | 2U Chassis | |
Air Shroud | MCP-310-82908-0B | 1 | Mylar air shroud set for SC829U/219U, X10DRU+, L-Heatsink + GPU,RoHS/REACH |
Add-on Card / Module | AOC-2UR68-I2XT | 1 | 2U Ultra Riser based on Intel X540 controller with 2 10Gbase-T ports, 1 internal PCI-E x8 3.0 slot, 1 PCI-E x16 3.0, and I PCI-E x8 3.0 (in x16 slot) |
Backplane | BPN-SAS3-826A | 1 | BPN-SAS3-826A,HF,RoHS/REACH |
Cable 1 | CBL-SAST-0631 | 1 | cross-over mini SAS HD to 4 SATA w/SB, S. 55cm. 30AWG,RoHS/REACH |
Cable 2 | CBL-SAST-0657 | 1 | Internal RA side exit (right) miniSAS to miniSAS HD 55cm w/ SB, 30AWG,RoHS/REACH |
Cable 3 | CBL-SAST-0655 | 1 | Internal RA side exit (right) miniSAS to miniSAS HD 47cm w/ SB, 30AWG,RoHS/REACH |
Cable 4 | CBL-PWEX-0652 | 1 | 8 pin female to 2x RA(Right Angle) big 4 pin female power, 60/65CM, 18AWG,RoHS/REACH |
Cable 5 | CBL-PWEX-0673 | 1 | 8 pin female to 2x big 4 pin female power, 65/70CM, 18AWG,RoHS/REACH |
Parts | MCP-240-82910-0N | 1 | Ultra I/O bracket for SC829U, 219U (i2XS),HF,RoHS/REACH |
Label | LBL-0108 | 1 | CAUTION LABEL FOR REDUNDANT PWR SYSTEMS |
Manual | MNL-1641-QRG | 1 | SYS-6028U-TR(4/4T/T/TP)+, QRG,HF,RoHS/REACH |
Riser Card | RSC-R2UW-4E8 | 1 | RSC-R2UW-4E8-O-P |
Riser Card | RSC-R1UW-E8R | 1 | RSC-R1UW-E8R-O-P |
Mounting Rails | MCP-290-00053-0N | 1 | Inner/outer rail set, quick-release type, 26.5″ to 36.4″ |
MCP-290-00060-0N | 1 | Threaded rail adapter default for round hole rack | |
Heatsink / Retention | SNK-P0058PSU | 2 | 2U Passive CPU Heat Sink for X10 2U 24-DIMM Ultra Series Servers,RoHS/REACH |
Đánh giá
Chưa có đánh giá nào.